Feiyu-tech WG


• 3-Axis Motorized Gimbal
• Fits GoPro HERO4 / HERO3+ / HERO3
• Accommodates LCD Touch BacPac
• Fixed Axes and Pan/Tilt Following Modes
• Horizontal and Vertical Mounting
• Inverted Mode
• 1/4"-20 Mounting Threads
• 1/4"-20 to GoPro Three-Prong Adapter
• GoPro Quick-Release Buckle
• Optional Gimbal Remote Control

Feiyu-tech WG

Feiyu-tech WG
Price: €149.99

Cashback Offer

You Save €150

Bonus Offer

Hero 3/3+/4 (3-Axis Wearable Gimbal)

Camera Compatibility

Compatible with GoPro HERO4, HERO3+, HERO3, and other models with similar dimensions. There is also enough room to accommodate an attached GoPro LCD BacPac.

Flexible Mounting Options

Two 1/4"-20 threaded holes lets you mount the camera horizontally or vertically. It can also be used with any accessory that has a standard GoPro three-prong mount or GoPro quick-release interface using an included adapter and quick-release buckle.

Operating Modes

Pan Following Mode: Locks tilt and roll axes. Camera smoothly pans to follow the direction of the handle.
Pan and Tilt Following Mode: Locks roll axis. Camera smoothly follows the pan and tilt motion of the handle.
Lock Mode: Locks the pan, tilt, and roll axes of the camera in the position it is in when mode is activated.
Inverted Mode: Allows you to turn the gimbal upside-down. This mode is an inverted version of the Pan Following Mode.

Manual Pulling Locking: After the gimbal has been powered on for eight seconds, the tilt angle can be adjusted manually in the Pan Follow Mode and the Lock Mode. Adjust the title angle to the desired position and wait for 0.5 second until the gimbal registers the new angle.

Camera Orientation Detection System

No matter how your camera is mounted (left-aligned or right-aligned, upright or inverted), the Feiyu WG will identify the mounting position and automatically make the appropriate adjustments to its configuration.

Single-Button Operation

A single button is used to turn the gimbal on/off and switch between operating modes.

Video and Camera Charging Interface

Using an included cable, you can connect the GoPro to the WG's video and camera charging interface port, allowing you power the camera from the gimbal batteries, as well as receive an analog video signal from the GoPro. This signal is output via the micro-USB port for sending to an optional external monitor.

Compatible with Optional Remote Control

An optional remote control is available that enables pan, tilt, and roll angle adjustment, as well as other calibration settings. For manual tilt adjustment, simply hold the camera in the desired position for about half a second to register the setting.

Feiyu FY-WG Specs

Camera CompatibilityMaximum Height: 1.72" / 43.6 mm
Maximum Thickness: 1.25" / 31.7 mm
Weight: 5.3 oz / 150 g

Tilting Range320°

Pan Range320°

Roll Range100°

Tilt Following Rate2°: to 75°/S

Panning Following Rate3° to 150°/S

Static Attitude Tracking Accuracy0.01 to 0.05° (working voltage)

Motion Attitude Tracking Accuracy0.1 to 0.5° (motor overload <2G)

Power2 x 16340 type, 650 mAh batteries

Battery Runtime3 to 4 hours

Working Voltage6 to 9 VDC

Overload Current Protection800 mA

Weight6.6 oz / 188 g (without batteries or camera)