Rode Stereo VideoMic Pro Plus | Camera Centre | Rode Mic Ireland

Rode Video Mic ProR+


Share

Highlights
• For DSLRs, Camcorders & More
• Improved RF-Immunity Over Previous Model
• 20 Hz to 20 kHz Frequency Response
• Rycote Lyre Shockmount
• 3.5mm Mini-Jack Output, Dual Mono Output
• Right Channel Can Act as Safety Channel
• Selectable HPF and High-Frequency Boost
• Included Rechargeable Li-Ion Battery
• Battery Lasts Over 100 Hours
• Includes Micro-USB & TRS Cables


Rode Video Mic ProR+

Rode Video Mic ProR+
Product Code: RODEVMP+
Barcode/EAN: 698813004980
Black
299.99
Qty    

Available Mid September

The VideoMic Pro Plus sports a 3.5mm stereo mini-jack termination, outputs a dual-mono signal, and provides a TRS cable to make the connection. A micro-USB cable is also supplied, which can be used to draw bus-power. The microphone's supercardioid polar pattern ensures that surrounding audio is minimized, and that your recording is focused on the subject in front of the camera. Its inherent low-noise circuitry ensures you will not pick up any sound from the microphone's robust innards. The microphone boasts +20 dB settings for DSLR cameras, a flat setting for high-quality preamps, and a -10 dB pad.

Other features abound, such as an Automatic Power Function, a built-in battery door, and a high-pass filter with cuts at 75 Hz and 150 Hz. The filter will prevent low-end noise such as air conditioners and traffic from being picked up on the resulting track. If you're unsure how loud the audio you're capturing might be, you can set the right channel to record at a lower level for safety. A selectable high-frequency boost is also available. 

To power the VideoMic Pro Plus, you can use two AA batteries, the micro-USB cable, or the built-in rechargeable LB-1 lithium-ion battery, which lasts 100 hours on a single charge. This microphone features an auto-powering feature which helps you save battery life by powering on with a mic cable is connected and powering off when it isn't. 

Acoustic Principle:  Line gradient
Directional Pattern:                 Supercardioid
Frequency Range:       20 Hz to approximately 20 kHz
High-Pass Filter:           Selectable at 75 Hz, 150 Hz
Sensitivity: -33.6 dB re 1 V/Pa (21.2 mV at 94 dB SPL) ±2dB at 1 kHz
Output Impedance: 200 Ohms
Equivalent Noise: 14.2 dBA SPL
Maximum Output: 7.72 dBu (at 1 kHz, 1% THD into 1 kOhm)
Dynamic Range: 118.8 dB
Maximum SPL: 133 dB SPL
Signal to Noise Ratio:          79.8 dB
Power Options: LB-1 RØDE custom lithium-ion rechargeable battery (~12 mA current draw)
2 x AA batteries (~17 mA current draw), or via micro-USB port
Battery Life: LB-1 Battery Life: Over 100 hours
Battery Charger: Micro-USB cable (supplied)
Output Connection:     Dual mono unbalanced on stereo 3.5 mm jack
Dimensions: 6.7 x 4.4 x 2.6" / 170.0 x 111.0 x 66.0 mm
Weight: 4.3 oz / 122 g